MS-AZ2002 | Shark® Vertex DuoClean® PowerFins Upright Vacuum

The Shark® Vertex™ Powered Lift-Away® is Shark’s most powerful vacuum, featuring DuoClean® PowerFins. While the soft front roller pulls in particles, PowerFins deliver nonstop contact to pick up more in every pass. (vs. original DuoClean®) Plus, Powered Lift-Away® lets you detach the pod to go under furniture with a motorized nozzle or clean above the floor with a push of a button.
• Shark’s most powerful vacuum ever, with incredible suction and innovative cleaning technologies.
• DuoClean PowerFins - A PowerFin roller and a soft roller combine on all floors. Continuous cleaning contact to dig deep into carpets, directly engage floors, and pick up more in every pass. (vs. original DuoClean)
• Self-cleaning brushroll for powerful pet hair pickup with no hair wrap.
• Engineered to pick up more pet hair with no hair wrap (vs. shark bristle nozzles)
• Powered Lift-Away®: Lift away the pod for motorized cleaning under furniture, or detach the nozzle and clean above the floor.
• Anti-Allergen Complete Seal Technology® and a HEPA filter trap 99.9% of dust and allergens inside the vacuum cleaner. (Based on ASTM F1977 of particles .3 microns or larger.)
• Powerful LED lights on the nozzle reveal hidden debris around your home.
• Active Glide™ Technology: smooth maneuverability on hard floors and carpets while maintaining powerful suction.
• Includes tools to tackle stubborn pet hair and hard-to-reach spaces.

Cleaning Path Width	30.48 cm
Color	Rose Gold
Wattage	1344 watts
Warranty (years)	5
LED Lights	Yes
Weight	16.38 lbs
Hose Length	1.68 m
Cord Length	9.14 m
Product Dimensions (cm)	30.48 cm L x 38.33 cm W x 117.48 cm H
Voltage	120 volts
Dust Cup Capacity	0.95 L
Amperage	11.8 amps
Filter Type	Washable HEPA + Foam and Felt Filters

Free shipping on all orders over $75*

SharkNinja offers a 60-day money back guarantee for purchases from this Site, or for select products, a 90-day money back guarantee. The applicable money back guarantee will be stated with your order.

*does not apply outside of Canada. Orders to be shipped to Northwest Territories, Yukon or Nunavut or other territories outside of Canada or to an international address are subject to a surcharge.

Dusting brush
Pet Crevice tool
Self-cleaning pet power brush

How do I assemble my vacuum?

Insert the wand into the pod.
Insert the handle into the wand.
Connect the hose into the back of the pod, until it clicks into place.

For proper operation, ensure all parts are firmly clicked into place.

How do I use the different cleaning modes?

This Shark® vacuum has three powerful settings for cleaning located right below the power button.

To clean bare floors, tile, and low pile area rugs:

Slide the surface selector switch to Hard Floor.
Press the power button, tilt the handle back while gently stepping on the floor nozzle. Note that the brushroll will spin slower in this mode.

Note: Use Hard Floor setting for max suction when cleaning above floors and for easier maneuverability on low pile area rugs

To clean low pile carpets:

Slide the surface selector switch to the middle setting; Carpet/Low Pile .
Tilt the handle back while gently stepping on the floor nozzle.

To clean thick carpets:

Slide the surface selector switch to the top setting; Thick Carpet.
Tilt the handle back while gently stepping on the floor nozzle. Note that the brushroll will spin in faster this mode.

When and how do I clean the filters?

Filters may need to be cleaned if the vacuum stops picking up dirt, if airflow is restricted, or if you notice lighter or no suction. For optimal performance, clean filters regularly. Between cleanings, lightly tap filters over a trash receptacle to remove dust and debris as needed.

Rinse the pre-motor foam and felt filters every 3 months, or as needed.

First, remove the dust cup to access the pre-motor filters.
Slide up the release latches on both sides of the dust cup handle. Lift the dust cup up and away from the pod.
Remove the foam and felt filters.
Rinse both filters with water only.
Allow filters to air-dry completely (at least 24 hours) before reinstalling.
Once dry, install the felt filter first, followed by the foam filter.
Reinstall the dust cup by placing the bottom of the dust cup into the pod and then tilting until it clicks into place.

Rinse the post-motor HEPA filter every 12 months, or as needed.

Pull the latch under the HEPA filter cover and lift off the cover. This is located underneath the Lift-Away logo on the bottom of the pod.
Remove the HEPA filter, press the side latch
Rinse with water only.
Allow filter to air-dry completely (at least 24 hours) before reinstalling.
Once dry, reinstall the HEPA filter.
Reattach the HEPA filter cover until it clicks into place.

When and how do I empty the dust cup?

For optimal performance, empty the dust cup each time you vacuum, or when debris reaches the MAX FILL line.

Press the button on the top of the pod. Lift the dust cup up and away from the pod.
Hold the dust cup over the trash and press the bottom door release button.
Tap gently to empty contents.
Close the dust cup door, pressing it until it clicks into place.
If needed, turn the dust cup upside down over the trash and press the top release buttons.
Tap gently to remove contents. Clear debris from the cone-shaped screen.
To reinstall, place bottom of dust cup into the pod and then tilt until it clicks into place.